Spreader Bars / Spreader Beams

The EW-CEXL1726 Crane Spreader Beam is designed to lift long loads via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam / Crane Spreader Bar with a truck-mounted or overhead crane.

This Crane Spreader Beam is designed to lift long loads via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam / Crane Spreader Bar with a truck-mounted or overhead crane.

Spreader Beams consist of a long beam that converts the lifting load into a bending moment through the beam. This is a much less efficient use of material, and as a result, spreader beams are in general heavier than spreader bars. The main benefit of spreader beam is the substantially reduced headroom required to perform the lift. These qualities make spreader lifting beams well-suited to lighter, shorter span lifts that have a small headroom requirement, such as in smaller manufacturing shops or storage facilities. The EW-CSB 2x2 Crane Spreader Beam is 2 metres in length and has SWL of 2 tonnes. The 2x2 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.

The type EW-CFL-2439 Spreader Beam is a unique multitasking Beam which can be used by Crane or Forklift to lift long loads. Using a Crane, loads can be lifted via the centre single hook point (as a "Lifting Beam"), or end lifted using a 2 leg Chain Sling (as a ‘Spreader Beam’). If lifting by forklift, the 600mm long slipper pockets allow for fast and safe connection to the truck.

This Crane Spreader Beam is designed to spread a two legged top sling and boasts better stability than a lifting beam and a higher potential capacity for a given size of steel section used.

This Spreader Beam is a unique multitasking Beam which can be used by overhead crane or forklift to lift long loads. When used by crane, loads can be lifted via the centre single hook point as a Lifting Beam, or end lifted using a 2 leg chain sling as a Spreader Beam. If lifting by forklift, the 600mm long slipper pockets allow fast and safe connection to the truck.

This IBC & Pallet Lifter is designed to safely lift a complete IBC container or pallet using an overhead crane.

The EW-CSB 10x4 Crane Spreader Beam is 10 tonne capacity SWL and 4 metres in length to suit most applications.

The EW-CSB-10-7M Crane Spreader Beam is 7 metres in length and has a huge 10 tonne SWL to suit any applications.

Crane Spreader beam is painted safety yellow colour in enamel paint. The EW-CSB 3x3 Crane Spreader Beam is 3 metres in length and has SWL of 3 tonnes. The 3x3 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.

The EW-CSB 5x4 Crane Spreader Beam is 4 metres in length and has SWL of 5 tonnes. The 5x4 Spreader Beams are supplied standard with 5 lifting positions and also supplied with 2 safety swivel hooks.

Crane Cable Drum Dispenser for cable drum reels up to 1800mm width to safely lifting and safely dispensing cables from cable reel drums by crane

Crane Spreader Beam Roll Dispenser up to 6000mm width to safely lifting and lay rolls and liners in the construction and landscaping industries eg geotextiles

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

This Multi Position Spreader Bar is designed to provide support, stability and minimising lateral forces during lifting operations by crane, to ensure heavy loads are safely transported and placed onsite.

Crane bulk bag lifter with 2000kg capacity suitable for lifting bulk bags by overhead crane.